DEQ-117 F (Post-Run) Process Report

Top  Previous  Next

DEQ-117 F (Post-Run) Process Report

 

 

The NJ DEQ-117F report is required for pilot plant operations in New Jersey.  NJ DEQ-177F reports post-run calculations for the emission rates of each chemical classification from each emission source for a batch.  It is a tedious and challenging report to generate because the chemical process must be reviewed as a function of time to determine the highest one-hour emission rates for each chemical classification.  The batch cycle average value may be substituted for the maximum one-hour average emission rate for selected classifications only.

 

The DEQ-117F report may be generated by selecting the Pilot Plant button from the main Emissions Accountant display, then edit the correct batch by highlighting the correct process and batch and select the Edit Batch button.  In the Batch Editor select the DEQ-117 F report from the Reports drop down menu.

 

Category

Sub-Category

Actual

Permit Allowable

Total Particulate

 

1.0 hour average

from operating permit.

 

Biological

1.0 hour average

 

 

Radionuclide

1.0 hour average

 

 

CR+6

1.0 hour average

 

 

Metal

1.0 hour average

 

 

Asbestos

1.0 hour average

 

 

Dioxin

1.0 hour average

 

 

LOC

1.0 hour average

 

 

HAP-Partulate

1.0 hour average

 

 

Other Particulate

1.0 hour average

 

Total VOC

 

batch cycle average

 

 

VCM

batch cycle average

 

 

TVOS

1.0 hour average

 

 

EVOS

batch cycle average

 

 

HAP-VOC

batch cycle average

 

 

Other VOC

batch cycle average

 

Acid Gases

 

1.0 hour average

 

 

HAP-Acid

1.0 hour average

 

 

Gas

1.0 hour average

 

CO

 

1.0 hour average

 

NOx

 

1.0 hour average

 

SO2

 

1.0 hour average

 

BASE

 

1.0 hour average